Toyota Hilux Vigo 2005-15 N70 KUN26 Upper Control Arms

Ideal to maximise suspension lift after a body lift




Express Courier International Merchandise - $49.00
Deliver World Wide Via Air

$824.00

More info.

Make 4 interest-free payments of $206.00 fortnightly and receive your order now.

In Stock

After fitting a body lift, many people want to fit the biggest tyres available. This has a substantial impact on the wheel alignment of the Toyota Hilux. The solution to this is to fit after market Hilux upper control arms (Commonly called Hilux UCA's) that correct both the camber and caster. In Australian conditions it is critical that the ball joints on Hilux upper control arms are protected with a ruibber boot. In Australia, experience has shown that exposed uniball styleball joints fitted to some HiluxUCA's have a very short service life. It is also desirable that there is additional adjustment in Hilux upper control arms to correct the caster. Avoid the exposed uniball type ball joint as they are a high maintenance part designed for offroad racing conditions where they are considered a consumable part. 

The Hilux UCA's in this listing meet all of the criteria a quality Hilux upper control arm must meet.  

This is a proven offroad product that not only corrects camber but also offers 7 positions for the top ball joint to alter caster as much as 4.0 degrees. Essential for high lift situations, these upper control arms will allow perfect wheel alignment for lifted vehicles whilst also allowing fitment of positive offset rims that reduces wheel turning radius. This in turn reduces the clearance issues around the guards and body mounts. By adding more caster, more clearance is achieved at the rear of the wheel . Now supplied complete with a greasable upper ball joint (not shown in the listing). So in summary these upper control arms for the Toyota Hilux:

  1. Correct camber after a fitting a suspension lift

  2. Correct caster by as much as 4 degrees after fitting a suspension lift

  3. Provide more clearance between the tyre and upper control arm to permit the use of narrower offsets which also enhance wheel clearance at the rear of the tyre

  4. Provide more clearance between the tyre and body mount to avoid or minimise further modifications (eg. body mount chop)

 

(CO-000001)

SKU CO-000001
Brand CalOffroad
Shipping Weight 9.0000kg
Shipping Width 0.410m
Shipping Height 0.200m
Shipping Length 0.310m
Shipping Cubic 0.025420m3
Unit Of Measure ea

Be The First To Review This Product!

Help other Vehicle Modifications Network users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category