Looking to change out your upper control arms without hitting the bank account too hard? VMN now offers a performance upper arm that utilizes the OEM Toyota ball-joint. It gives many of the same benefits their uniball upper arms offer at a much lower cost. By building an upper arm to re-angle the ball-joint, you’re able to gain more wheel travel and keep the joint in its normal operating range. These arms also correct the suspension geometry by increasing much needed caster which improves handling and allows for a wider range of alignment adjustment. The tubular construction also gives you more tire & shock clearance compared to the stock stamped arm.

Features:
Tubular chromoly upper a-arms
Re-angled ball-joint to increase wheel travel over stock
Increase in positive caster geometry for better handling
Energy Suspension polyurethane bushings with thick inner sleeves
Uses factory ball-joints and hardware
Includes all necessary hardware
Stainless steel ABS line clamps
Powder coated gray finish

Notes:
These arms are designed to be used with stock unmodified spindles or Camburg performance lift spindles in conjunction with an approved 2”-3” lift bolt-in coilover. They were not designed to be used in conjunction with other suspension kits or spacer type kits.

Maximum wheel backspacing = 4.50”



Price shown is per pair

Select from the drop down options to include a set of ball joints with 5 year 100,000 km warranty and optional fitting of them so that you can fit these as an easy DIY job but remember to grab a wheel alignment afterwards.